3D Printer Filament Comparisons: Specs Side by Side
Two products, one page, the makers’ own numbers.
Like-for-like comparisons of two exact products, built from each maker’s documentation, with who should choose which. Grouped by material and upgrade.
Updated · By the FilamentFinders editorial team
All comparisons
PLA comparisons
PLA hub ↗
Prusament PLA vs Polymaker PolyLite PLA
Prusament PLA and Polymaker PolyLite PLA compared on maker data: temperatures, speed, tolerance, spools, AMS notes, drying, and test figures.
Bambu Lab PLA Basic vs ELEGOO PLA
Bambu Lab PLA Basic and ELEGOO PLA compared on maker data: temps, speed, spools, and AMS fit. Pick Bambu for an AMS, ELEGOO for no-glue printing elsewhere.
Overture Matte PLA vs Bambu Lab PLA Matte
Overture Matte PLA vs Bambu PLA Matte on maker data: temperatures, abrasion, spools, AMS fit, and drying. Pick Bambu for the AMS, Overture for warm beds.
Creality Hyper PLA RFID vs ELEGOO Rapid PLA+
Creality Hyper PLA RFID vs ELEGOO Rapid PLA+ on maker data: speed, temperatures, spools, drying, tests. Pick Creality for a CFS, ELEGOO for published specs.
Bambu Lab PLA Matte vs Polymaker Panchroma Matte PLA
Bambu Lab PLA Matte and Polymaker Panchroma Matte PLA compared on maker data: temps, spools, and AMS fit. Pick Bambu for an AMS, Panchroma for other printers.
eSUN PLA+ vs Polymaker PolyLite PLA Pro
eSUN PLA+ vs Polymaker PolyLite PLA Pro on maker data: temperatures, speed, drying, spools, and test figures. Pick eSUN for speed, Polymaker for ISO data.
Overture PLA vs ELEGOO PLA
Overture High Speed PLA vs ELEGOO PLA on maker data: temperatures, speed, spools, drying. Pick Overture for a full data sheet, ELEGOO for one speed figure.
Bambu Lab PLA Basic vs Polymaker PolyLite PLA
Bambu PLA Basic and Polymaker PolyLite PLA compared on maker data: temps, speed, spools, and AMS fit. Pick Bambu for fast AMS prints, PolyLite for any printer.
PETG comparisons
PETG hub ↗ELEGOO PETG HF vs Creality Hyper PETG
ELEGOO PETG HF and Creality Hyper PETG compared on maker data: temperatures, speed claims and their basis, plates, drying, spools, and heat figures.
Prusament PETG vs Polymaker PETG
Prusament PETG and Polymaker PETG compared on maker data: temperatures, sheets, speed, drying, and spools. Pick Prusament on a Prusa, Polymaker for speed.
Creality Hyper PETG vs ELEGOO Rapid PETG
Creality Hyper PETG vs ELEGOO Rapid PETG on maker data: temps, speed, spools, drying. Pick ELEGOO for published specs, Creality for a lower nozzle range.
Overture PETG vs eSUN PETG
Overture PETG vs eSUN PETG on maker data: temperatures, bed, speed, drying, spools, and heat figures. Pick Overture for cooler beds, eSUN for hotter beds.
Bambu Lab PETG Basic vs Polymaker PETG
Bambu Lab PETG Basic vs Polymaker PETG on maker data: speed, temperatures, drying, spools, AMS fit. Pick Bambu for an AMS, Polymaker for high-flow printing.
Bambu Lab PETG HF vs ELEGOO Rapid PETG
Bambu Lab PETG HF vs ELEGOO Rapid PETG on maker data: temperatures, speed, drying, spools, AMS fit. Pick Bambu for an AMS, ELEGOO for a higher speed claim.
ABS comparisons
ABS hub ↗SUNLU ABS vs Anycubic ABS
SUNLU ABS and Anycubic ABS compared on maker data: settings, enclosure, drying, ACE support, and tests. Pick Anycubic for ACE Pro, SUNLU for enclosed printers.
ELEGOO ABS vs Creality Hyper ABS
ELEGOO ABS and Creality Hyper ABS compared on maker data. Pick ELEGOO for published settings, Creality for a Creality printer if you can fill the gaps.
eSUN ABS+ vs Overture ABS
eSUN ABS+ and Overture ABS compared on maker data. Pick Overture for drying guidance and a documented setup, eSUN for a 110 °C bed and faster printing.
Bambu Lab ABS vs Polymaker PolyLite ABS
Bambu Lab ABS and Polymaker PolyLite ABS compared on maker data. Pick Bambu for an AMS with a reusable spool, Polymaker for a spool that loads as it comes.
TPU comparisons
TPU hub ↗ELEGOO TPU 95A vs eSUN eTPU-95A
ELEGOO TPU 95A and eSUN eTPU-95A compared on maker data. Pick ELEGOO for a cool bed and a hotter dryer, eSUN for a dryer under 65 °C and feeding advice.
Polymaker PolyFlex TPU90 vs PolyFlex TPU95
Polymaker's 90A and 95A TPUs compared on its own data: softness, speed, extruder needs, AMS, drying, and same-method test figures.
NinjaTek Cheetah 95A vs Bambu Lab TPU 95A HF
Two fast 95A TPUs compared on maker data: temperatures, speed, Bowden and AMS rules, drying, and spools. Pick Bambu for Bambu printers, Cheetah for Bowden.
Overture TPU 95A vs SUNLU TPU 95A
Two 95A TPUs on maker data: speed, temperatures, retraction, drying, AMS. Pick Overture for slow speeds and clear feeding rules, SUNLU for faster guidance.
Polymaker PolyFlex TPU95 vs Bambu Lab TPU 95A HF
Two 95A TPUs compared on maker data: speed, feeding, AMS rules, drying, and spools. Pick Bambu's for fast Bambu printing, PolyFlex for slow direct drive.
Siraya Tech Flex TPU 85A vs NinjaTek NinjaFlex 85A
Two 85A TPUs compared on maker data: speed, temperatures, feeding, drying, and tests. Pick Siraya to print faster, NinjaFlex for slow prints and detailed tests.
Bambu Lab TPU for AMS vs TPU 95A HF
Bambu Lab's two TPUs compared on its own data. Pick TPU for AMS for firm parts fed through the AMS, TPU 95A HF for soft parts from the external spool.
Specialty materials comparisons
Specialty materials hub ↗Anycubic ASA vs ERYONE ASA High-Speed
Anycubic ASA and ERYONE ASA High-Speed compared on maker data: heat, speed, enclosure, drying, ACE. Pick ERYONE for fast enclosed printers, Anycubic for ACE.
SUNLU Silk PLA+ vs ELEGOO PLA Silk
SUNLU Silk PLA+ vs ELEGOO PLA Silk in gold on maker data: temperatures, bed, drying, spools, tests. Pick SUNLU for ISO-tested data, ELEGOO for a 190 °C start.
ELEGOO PETG-CF vs Siraya Tech PETG-CF Pro HF
Two carbon-fiber PETGs on maker data: nozzles, temperatures, drying, enclosure, AMS, heat. Pick ELEGOO for open-frame printers, Siraya Tech for high flow.
eSUN ASA+ vs SUNLU ASA
eSUN ASA+ and SUNLU ASA compared on maker data: heat, enclosure, drying, and tests. Pick eSUN for an enclosed 110 °C bed, SUNLU for a bed that maxes at 100 °C.
eSUN PLA-Silk vs Overture Silk PLA
eSUN PLA-Silk vs Overture Silk PLA on maker data: temperatures, speed, gloss advice, drying, and spools. Pick eSUN to print fast, Overture to print slow.
Polymaker Fiberon PA12-CF10 vs SUNLU PA12-CF
Two carbon-fiber PA12 nylons on maker data: hotend, bed, fan, drying, annealing, AMS. Pick Polymaker for a cool-bed annealed workflow, SUNLU for 260–280 °C.
Polymaker Fiberon PET-CF17 vs Siraya Tech PET-CF
Two carbon-fiber PETs on maker data: hotend heat, nozzles, drying, annealing, AMS. Pick Polymaker for 300 °C hotends, Siraya Tech to skip annealing.
Polymaker Panchroma Dual Silk vs ELEGOO Silk Dual
Panchroma Dual Silk vs ELEGOO's dual-color PLA Silk on maker data. Pick Polymaker for color-effect and speed guidance, ELEGOO for a full property table.
Prusament ASA vs Polymaker ASA
Prusament ASA and Polymaker ASA compared on maker data: heat, cooling, enclosure, drying, and spools. Pick Prusament for a 110 °C bed, Polymaker below 100 °C.
Bambu Lab PLA Silk+ vs Polymaker Panchroma Silk PLA
Bambu Lab PLA Silk+ and Polymaker Panchroma Silk PLA compared on maker data: temps, gloss, and AMS fit. Pick Bambu for an AMS, Panchroma for faster gloss.
Polymaker Fiberon PA6-CF20 vs ELEGOO PAHT-CF
Two carbon-fiber nylons on maker data: nozzles, drying, enclosure, bed heat, annealing, AMS. Pick Polymaker for open printers, ELEGOO for hot enclosed ones.
ELEGOO PLA-CF vs Polymaker PolyLite PLA-CF
ELEGOO PLA-CF vs PolyLite PLA-CF on maker data: nozzles, temperatures, drying, AMS rules, heat. Pick ELEGOO for glue-free PEI, Polymaker for a data sheet.
Polymaker ASA vs Overture ASA
Polymaker ASA vs Overture ASA on maker data: temperatures, speed, drying, enclosure. Pick Polymaker for faster printing, Overture for a slow, hot profile.
Nozzles comparisons
Nozzles hub ↗
Bambu A1 Hotend: 0.4 mm Hardened Steel vs 0.2 mm Stainless Steel
Bambu Lab's 0.4 mm hardened and 0.2 mm stainless A1-series hotends compared on Bambu's data: filaments, detail, speed, swap and A1/A2L fit.
Micro Swiss CM2 RepRap (V6) vs E3D V6 Brass Nozzle
Micro Swiss CM2 and E3D's brass V6 nozzle compared on maker data: wear, abrasive filament, temperature, thread, sizes, and Prusa MINI fit.
Creality Unicorn vs E3D ObXidian High Flow Unicorn Nozzle
Creality's Unicorn nozzle vs E3D's ObXidian High Flow Unicorn on maker data. Pick Creality for a stock-style spare, E3D for frequent CF prints.
E3D ObXidian vs Brass Prusa Nextruder Nozzle
E3D's ObXidian and brass Nextruder nozzles compared on maker data. Pick brass for PLA, PETG, and ASA, ObXidian for carbon-fiber or glow filaments.
Bambu Lab Hardened Steel Hotend vs E3D High Flow ObXiDian 500 for X1C
Bambu Lab's hardened steel X1C hotend vs E3D's High Flow ObXiDian 500 on maker data. Pick Bambu for a maker spare, E3D for abrasives and flow.
Micro Swiss CM2 MK8 vs Creality Hardened Steel MK8 Nozzle Kit
Micro Swiss CM2 MK8 vs Creality's hardened steel MK8 kit on maker data: hardness, thread, sizes, Ender-3 fit. Pick Micro Swiss for specs, Creality for spares.
Build plates comparisons
Build plates hub ↗
BIQU CryoGrip Glacier vs Creality PEI for Ender-3
BIQU CryoGrip Glacier and Creality's PEI sheet for the Ender-3 compared on maker data. Pick Glacier for low bed temps, Creality for smooth PEI or an S1.
Creality K1 Max Smooth PEI vs Epoxy Build Plate
Creality's smooth PEI and epoxy plates for the K1 Max and Ender-3 V3 Plus compared on maker data. Pick PEI for a smooth bottom, epoxy for two coated sides.
BIQU CryoGrip Pro Glacier vs Frostbite
BIQU CryoGrip Glacier and Frostbite plates compared on maker data: texture, bed temps, and Bambu fit. Pick Glacier for more materials, Frostbite for low temps.
Dryers & dry boxes comparisons
Dryers & dry boxes hub ↗
EIBOS Cyclopes vs SUNLU FilaDryer S4
EIBOS Cyclopes and SUNLU FilaDryer S4 compared on maker data: spool count and fit, 70 °C heat, airflow, humidity control, timers, feeding, and power.
SUNLU FilaDryer SP2 vs S2
SUNLU's FilaDryer SP2 and S2 compared on maker data and manuals: spool size, storage, heating, humidity readout, timer, power, and printing while drying.
EIBOS Easdry vs eSUN eBOX Lite
EIBOS Easdry and eSUN eBOX Lite single-spool boxes compared on maker data. Pick EIBOS to dry filament, eSUN to keep dry filament warm while printing.
SUNLU FilaDryer E2 vs S2
SUNLU's FilaDryer E2 and S2 compared on maker data: heat range, spool fit, annealing, power, and size. Pick the E2 above 70 °C, the S2 for one small spool.
EIBOS Cyclopes vs Sovol SH02
EIBOS Cyclopes and Sovol SH02 two-spool dryers compared on maker data. Pick EIBOS for wider spools, Sovol for presets, safety cut-outs, and sealing.
eSUN eBOX Lite vs SUNLU FilaDryer S2
eSUN eBOX Lite and SUNLU FilaDryer S2 compared on maker data. Pick eSUN to keep dry filament warm while printing, SUNLU to set a drying temperature.
SUNLU FilaDryer S2 vs Polymaker PolyDryer
SUNLU FilaDryer S2 vs Polymaker PolyDryer on maker data: heat, spool fit, power, feeding. Pick the S2 to set a temperature, the PolyDryer for sealed storage.
SUNLU FilaDryer S4 vs Creality SpacePi X4
SUNLU FilaDryer S4 vs Creality SpacePi X4 on maker data: heat, chambers, spool fit. Pick the S4 for PLA, PETG, TPU; the X4 for 85 °C engineering filaments.
Enclosures comparisons
Enclosures hub ↗
VEVOR S0001 vs S0002 3D Printer Enclosure: Which Tent Size?
VEVOR's S0001 and larger S0002 printer tents compared on VEVOR's own data: size, printer fit, materials, venting, heat claims, and assembly.
Creality Multifunction Enclosure (Small) vs VEVOR S0001 Tent
Creality's Small Multifunction Enclosure and VEVOR's S0001 tent compared. Pick VEVOR for a light and a larger tent, Creality for a same-brand tent.
Tools comparisons
Tools hub ↗
Bondhus 10999 vs Wera 950/9 Hex-Plus Hex Key Sets
Bondhus's 10999 Balldriver and Wera's 950/9 Hex-Plus metric hex key sets compared. Pick Bondhus for a lifetime guarantee, Wera for color-coded keys in a holder.
Hakko CHP-170 vs Xuron 170-II Flush Cutters
Hakko CHP-170 vs Xuron 170-II flush cutters on maker data: rated capacity, hardness, size, and warranty. Pick Xuron for plastic, Hakko for copper wire.
Filament storage comparisons
Filament storage hub ↗SainSmart eVacuum Bags vs Polymaker PolyDryer Box
SainSmart's 10-bag vacuum kit and Polymaker's PolyDryer Box compared on maker data: printing from storage, desiccant, humidity readout, spool fit and reuse.
Polymaker PolyDryer Box vs Creality 10 kg Storage Box
PolyDryer Box vs Creality's 10 kg storage box on maker data: sealing, fit, feeding. Pick Polymaker to print from one sealed spool, Creality to shelve 10 kg.
TempPro TP49 vs Govee H5075 Hygrometers for Filament Storage
TempPro TP49 vs Govee H5075 hygrometers on maker data: accuracy, app alerts, size, power. Pick the TP49 for glance reads, the H5075 for phone alerts.
Ready to choose a product?
Each shortlist names exact products whose specs and fit we checked against the manufacturer.
- Best Filament for the Bambu Lab H2C (2026)
- Best Filament for the Original Prusa MK3S and MK3S+ (2026)
- Best Filament for the Original Prusa MK4 (2026)
- Best Filament for Beginners (2026)
- Best Filament for the Bambu Lab A2L (2026)
- Best Filament for the Bambu Lab P2S (2026)
- Best Filament for the Prusa MINI and MINI+ (2026)
- Best Filament for the Prusa XL and XL+ (2026)
- Best 3D Printer Enclosures (2026)
- Best 3D Printing Tools (2026)
- Best ABS Filament (2026)
- Best ASA Filament (2026)
- Best Build Plates (2026)
- Best Carbon Fiber Filament (2026)
- Best Filament Dryers (2026), by Spool Count and Max Temp
- Best Filament for the Bambu Lab A1 and A1 mini (2026)
- Best Filament for the Bambu Lab H2D and H2S (2026)
- Best Filament for the Bambu Lab P1S and P1P (2026)
- Best Filament for the Bambu Lab X1-Carbon and X1E (2026)
- Best Filament for the Creality Ender-3 V3, V3 SE, V3 KE, V3 Plus and V4 (2026)
- Best Filament for the Creality Ender-3, Ender-3 V2 and Ender-3 S1 (2026)
- Best Filament for the Creality K1, K1C and K1 Max (2026)
- Best Filament for the Prusa CORE One, CORE One L and MK4S (2026)
- Best Filament Storage (2026)
- Best Replacement Nozzles and Hotends (2026), Matched to Your Printer
- Best Silk PLA Filament (2026)
- Best Specialty Filament (2026)
- Best TPU Filament (2026)
- Best PETG Filament (2026)
- Best PLA Filament (2026)